• Tune your tuner without transmitting!
• Handles full legal power and more!
• Save that rig!

Only $99.95

Do you use an antenna tuner? Then you need the new Palomar Tuner-Tuner to tune it to your operating frequency without turning on your transmitter. Here's how it works: Connect the Tuner-Tuner between your tuner and your rig. Tune your receiver to the frequency on which you want to operate. Turn on the Tuner-Tuner. You'll hear a loud S9+ noise. Adjust your tuner until the noise drops out completely. Turn off the Tuner-Tuner and you're ready to transmit. Your SWR will be 1:1. It's as simple as that.

Your rig will love the Tuner-Tuner. The new solid state transceivers hate to work into high SWR. If you use the Tuner-Tuner they never see high SWR. Don't forget that more damage is done during tuneup than in many hours of operating. Save that rig! Use the Tuner-Tuner.

Make Friends. How many times have you tried to copy a weak signal while some poor soul sat there on frequency trying and trying to get his rig and antenna tuner set correctly? Does listening to this interminable carrier drive you up the wall? Don't be one of these helpless operators. Use a Tuner-Tuner.

This feature was available only in Palomar's $600 antenna tuner. Now It Is in a separate unit for use with any antenna tuner. Easy to use. Just connect the Tuner-Tuner between antenna tuner and rig. Turn it on to tune. Turn it off to transmit. You'll wonder how you ever got along without it!

SPECIFICATIONS: Frequency Range: 1.7-30 MHz. Operating Impedance: 50 ohms. Controls: On-Off. Panel Indicator: Red LED indicates "On". Connectors: SO-239. Power Pass Capability: 1000 watts when "Off". Power Required: 9-v DC @ 35 ma. Connector and holder for #1604 battery (battery not supplied). Size: 14 x 7x7 cm. (5-1/2 x 2-1/2 x.2-1/2 in.). Weight: 260 g. (9 oz.). Cabinet: Brushed aluminum panel; black cover.

Back to Index | Order Form
antenneX is an authorized distributor of the above product manufactured by Palomar®